 |
 |
 |
 |
 |
|
 |
||
 |
 |
|
|
|
|
 |
 |
|
 |
||||||||||||||||||||||||||||||||||||||
|
Ferrocon MgO Tundish Boards and Ferrocon Silica Tundish Boards
FERROCON Tundish Boards are designed and manufactured both in magnesite and silica compositions to match specific steel production needs. More than 10 million tons of steel per year is continuously being cast through Ferrocon tundish boards. |
|
|||||||||||||||||||||||||||||||||||||||
|
FERROCON-MgO is engineered to withstand ultralong sequences of high performance meltshops.
With increasingly sophisticated end use for tundish liner products, Ferrocon MgO performances such as 85 heats of 82 tons ladle lasting 76 hours, 73 heats of 100 tons ladle lasting 63 hours and many other ultralong sequence lengths are achieved with full confidence. Ferrocon MgO is tailor-made with variable thicknesses and densities, as well as, unique slag line support system according to tundish design and application. Selected raw material, thorough research, rigid process control result in the consistent quality of Ferrocon MgO tundish boards. With Ferrocon MgO, back up lining is prolonged and tundish deskulling is an easy and simple procedure. FERROCON-Silica is engineered in different densities from standard type to the premium MULTIPOUR to completely match the liner to user application. Carbon and low alloy steels with less than 1.2 % manganese are routinely cast with Ferrocon Silica boards. Ferrocon Silica offers the most economic solution for low sequence casting which does not exceed 10 hours. In addition to the full spectrum of liner boards, FCM series sealing mortar and ramming mixes produced both in silica and magnesite base to match the liner compositions are available to complete the full installation of each tundish lining. |
|
|
;)
;)
;)
;)
